A timer is a device that uses a specific principle to measure time. The user interface is easy to use and provides basic timing control functions, including: start timing, stop timing, continue timing, reset, and adjust timing.
Sensor modules such as digital tube module and expression panel, curved 9-hole aluminum parts, 18-hole angle aluminum and other mechanical parts, screws, nuts, gaskets and other hardware accessories.
Install the expression panel and the digital tube module in the corresponding position of the Mio chassis, and connect the Mio main board (note the interface connection method).
Press the red button and combination button of the infrared remote control to switch to the digital timer program. The Mio robot starts running, the expression panel displays the seconds, and the digital tube displays milliseconds.
1. “Digital Timer” in the manual.
2, the intermediate version of the textbook "race against time."
1. Pay attention to the interface connection sequence between the sensor and the main board.