Electric balance car, also known as body car. Its principle of operation is mainly based on a basic principle called "Dynamic Stabilization". The two-wheel electric balance car adopts two wheel supports, battery power supply, motor drive, plus control panel control, attitude sensor to collect angular velocity and angle signals, coordinate and control the balance of the car body, and can realize the start of the vehicle by changing the weight of the person. , acceleration, deceleration, stop, etc.
Try to use Mio's gyroscope module in combination with the encoder motor to create a balance car.
Gyro module, code motor and other sensor modules, 18-hole aluminum parts and other mechanical parts, screws, nuts, gaskets and other hardware accessories.
Install the encoder motor on both sides of the Mio chassis, install the encoder motor drive, and connect it to the Mio main board.
Use with the infrared remote control, press the combination button to switch the balancer's corresponding program. Put the Mio balance car upright, cooperate with the infrared remote control combination button, press the C key to restore the remote control function; press the B key to open the inspection line function; press the A key to open the obstacle avoidance function. During the movement, you can use the up, down, left and right buttons of the infrared remote control to control the balance car movement.
1. “Balanced car” in the manual.
1. Pay attention to the interface connection sequence between the sensor and the main board.